Filter
Top Products
20 Brocade SMI Agent User’s Guide
53-1001778-01
Access control
3
The value in the Status column changes from Not Persisted to Persisted, which means the
values are persisted to the provider.xml configuration file.
Setting up default SMI-A user mapping
You can set up a default mapping that applies to all SMI-A users that are not explicitly mapped in
the User Mapping section.
If a default mapping is not provided, then all unmapped SMI-A users inherit the same access as the
account used to connect to the switch.
Only one default mapping scheme is allowed for each fabric.
1. Launch the Brocade SMI Agent Configuration Tool.
2. Click Default User Mapping in the menu tree (see Figure 8).
FIGURE 8 Default user mapping
3. Click the Stop Server to stop the SMI-A, if it is running. This button is unavailable if the server is
already stopped.
4. Click Add.
5. Fill out the Default User Mapping Configuration dialog box and click OK.
The Proxy IP field is optional. If you do not specify the IP address of the proxy switch, then all
unmapped SMI-A users can access the fabric with the same RBAC role as the given switch user
name.
The SMIA SwitchUser field is mandatory.
The Default User Password field is mandatory if Radius Server Authentication is enabled;
otherwise, it is optional. If you enter a password, it must be valid, even if it is optional.