Filter
Top Products
Brocade SMI Agent User’s Guide 35
53-1001778-01
Firmware download software locations configuration
3
3. To change the settings, type new values in the URL, User Name, and Password fields:
URL URL to locate the database. If the Fabric Manager server is installed on the
same host as the SMI-A, the URL is:
jdbc:sybase:Tds:localhost:2638/fabman
Otherwise, replace localhost with the Fabric Manager server’s host IP
address, in IPv4 or IPv6 format.
User Name User name for the database user. Default DSN user name is: dba
Password Password for the database user. Default DSN password is: sql
4. Click Apply.
The changes take effect when you restart the server. Click Start Server to restart the server.
FIGURE 20 Configure Fabric Manager database server connection parameters
Firmware download software locations configuration
Use the following procedure to add, modify, or remove software locations for firmware download.
Configuring software locations for firmware download
1. Launch the Brocade SMI Agent Configuration Tool.
2. Click Software Locations in the menu tree (see Figure 21 on page 36).
The content pane displays the current software locations.