Filter
Top Products
4 - 1
CUSTOM SETTINGS
4
4
Custom Settings
Initial Setup
Setting Paper Size
You can use three sizes of paper for printing your copies: letter, legal and A4.
When you change the size of paper you have loaded in the DCP, you will need
to change the setting for the paper size.
After you connect the optional Cassette #2, you can select the paper size.
1
Press Menu/Set, 1, 1.
2
If you have the Cassette #2, press or
to select CASSETTE #1 or
CASSETTE #2, and then press
Menu/Set.
3
Press or to select LETTER, LEGAL or A4 (for the cassette you
selected in Step 2), and then press Menu/Set.
4
Press Stop.
Setting the Beeper Volume
You can set the beeper to LOW, HIGH or OFF. The default setting is LOW.
When the beeper is set to LOW or HIGH, the DCP beeps every time you press
a key or make an error.
1
Press Menu, 1, 2.
2
Press or to select your option.
3
When the LCD shows the option you want, press Menu/Set.
4
Press Stop.
Turning on Cassette #2 (Option)
When the optional CASSETTE #2 is set to ON, you can set paper size and the
cassette usage. (See
Setting Paper Size, above.)
1
Press Menu/Set, 1, 3.
2
Use or to select ON (or OFF),
and then press Menu/Set.
3
Press Stop.
1.PAPER SIZE
2.CASSETTE #2
2.BEEPER
3.CASSETTE #2