Filter
Top Products
USING THE BROTHER DCP AS A PRINTER
7 - 5
Printing on Thicker Paper and Card Stock
When the rear cover is lifted up, the DCP has a straight paper path from the
manual feed slot to the rear of the printer. Use this paper feed and output method
when you want to print on envelope, thicker paper or card stock.
1
Select manual feed mode in the printer driver.
2
Send the print data as usual.
3
Lift up the rear cover at the rear of the DCP.
4
Adjust the manual feed paper guides to the
width of the paper you are using.
5
Insert a single sheet of paper into the manual feed slot until the front edge
touches the paper feed rollers. Let go of the paper as the DCP pulls it into
position.
6
After the DCP ejects the printed page, return to Step 5 to insert the next sheet of
paper. The DCP will wait until you insert the next sheet of paper. Repeat Steps
5 and 6 for each page to be printed.
7
When you have finished printing, close the rear cover of the DCP.
To prevent the possibility of
transparencies smudging as
they stack in the output bin,
remove each transparency after
it exits.