Filter
Top Products
7 - 4
USING THE BROTHER DCP AS A PRINTER
Loading One Sheet of Paper
You do not have to choose Manual Feed in the Setup dialog box of your printer
driver. Insert the sheet of paper for Portrait (vertical) or Landscape (horizontal),
with the side you wish to print on face up in the manual feed slot.
1
Align the paper at the center of the manual feed slot and insert it all the way.
2
Adjust the paper guides
to the width of the
paper.
Loading More than One Sheet of Paper
1
Open the Setup dialog box of the Windows
®
printer driver and select Manual
Feed in the Paper Source section. Follow Steps 1 and 2 above to load the first
page. The DCP starts printing automatically.
2
After the first page is printed, the LCD
displays:
Insert the next sheet of paper to resume
printing.
3
Repeat Steps 1 and 2 until you have finished printing.
■ To stop or clear the manual feed, turn the DCP offline by pressing the Reset
key,—OR—Stop it with a PC command.
If you do not select Manual Feed, and insert a page in the manual feed slot, the
DCP will load the first page from the manual feed slot and subsequent pages
from the paper cassette.
Manual
Feed
Slot
MANUAL FEED
INSERT PAPER