Filter
Top Products
Chapter 2
2 - 2
Setting the Beeper Volume
You can change the beeper volume. The
default setting is
Med. When the beeper is on,
the DCP will beep when you press a key or
make a mistake.
1
Press Menu and or to select
1.General Setup.
Press Set.
2
Press or to select 3.Beeper.
Press Set.
3
Press or to select Low, Med,
High or Off.
Press Set.
4
Press Stop/Exit.
Toner Save
You can conserve toner using this feature.
When you set Toner Save to
On, print
appears lighter. The default setting is
Off.
1
Press Menu and or to select
1.General Setup.
Press Set.
2
Press or to select 4.Ecology.
Press Set.
3
Press or to select
1.Toner Save.
Press Set.
4
Press or to select On (or Off).
Press Set.
5
Press Stop/Exit.
General Setup
3.Beeper
General Setup
4.Ecology