Filter
Top Products
Troubleshooting and routine maintenance
6 - 15
6
Packing and shipping
the DCP
When you transport the DCP, use the
packing materials that came with your DCP. If
you do not pack the DCP properly, you could
void your warranty. The DCP should be
adequately insured with the carrier.
1
Turn off the DCP’s power switch.
2
Unplug the DCP from the AC power
outlet.
3
Unplug the cable from the DCP.
4
Open the front cover.
5
Remove the drum unit and toner
cartridge assembly. Leave the toner
cartridge installed in the drum unit.
6
Place the drum unit and toner cartridge
assembly into the plastic bag and seal
the bag.
7
Close the front cover.
8
Wrap the DCP in the plastic bag and
place it in the original carton with the
original packing material.
9
Pack the drum unit and toner cartridge
assembly, AC cord and printed
materials in the original carton as shown
below:
Note
If you are returning your DCP to Brother as
part of the Exchange Service, pack only the
DCP. Keep all separate parts and printed
materials to use with your “Exchange” DCP.
0
Close the carton and tape it shut.