Filter
Top Products
Chapter 6
6 - 22
6
Insert the new toner cartridge in the
drum unit until it clicks into place. If you
put it in properly, the lock lever will lift
automatically.
7
Clean the primary corona wire inside the
drum unit by gently sliding the blue tab
from right to left several times. Return
the blue tab to the Home position (
▼)
before reinstalling the drum unit and
toner cartridge assembly.
8
Install the drum unit and toner cartridge
assembly into the DCP.
9
Close the front cover.
Replacing the drum unit
(DR-350)
The DCP uses a drum unit to create print
images on paper. If the LCD shows
Change Drum Soon
, the drum unit is near
the end of its life and it is time to buy a new
one.
Even if the LCD shows
Change Drum Soon
,
you may be able to continue printing without
having to replace the drum unit for a while.
However, if there is a noticeable deterioration
in the output print quality (even before
Change Drum Soon
appears), then the
drum unit should be replaced. You should
clean the DCP when you replace the drum
unit. (See Cleaning the laser scanner window
on page 6-17.)
Note
The drum unit is a consumable item, and it is
necessary to replace it periodically. There are
many factors that determine the actual drum
life, such as temperature, humidity, type of
paper and how much toner you use for the
number of pages per print job. The estimated
drum life is up to 12,000 pages. The actual
number of pages your drum will print may be
significantly less than these estimates.
Because we have no control over the many
factors that determine the actual drum life, we
cannot guarantee a minimum number of
pages that will be printed by your drum.
CAUTION
When removing the drum unit, handle it
carefully because it contains toner. If toner
scatters and your hands or clothes get
dirty, immediately wipe or wash it off with
cold water.