Filter
Top Products
vii
Safety precautions
We use the following icons throughout this User’s Guide.
To use the DCP safely
Please keep these instructions for later reference and read them before attempting any
maintenance.
Warnings tell you what to do to prevent possible personal injury.
Electrical Hazard icons alert you to a possible electrical shock.
Hot Surface icons warn you not to touch DCP parts that are hot.
Cautions specify procedures you must follow or avoid to prevent possible damage to the
DCP or other objects.
Improper Setup icons alert you to devices and operations that are not compatible with the
DCP.
Notes tell you how you should respond to a situation that may arise or give tips about how
the current operation works with other features.
WARNING
There are high voltage electrodes inside the DCP. Before
you clean the inside of the DCP, make sure you have
unplugged the power cord from the AC power outlet.
Do not handle the plug with wet hands. Doing this might
cause an electrical shock.
After you use the DCP, some
internal parts are extremely
HOT!
To prevent injuries, be careful
not to put your fingers in the
areas shown in the illustration.