Brother 8060 All in One Printer User Manual


 
1
Carton components may differ from one country to another.
Save all packing materials and the carton.
Carton Components
Quick Setup Guide
CD-ROMs
For Windows
®
For Macintosh
®
AC Power Cord
Drum Unit Assembly
(including Toner
Cartridge)
Austraria & New Zealand users: Hong Kong, Malaysia & Singapore users:
The mains plug supplied with this machine is a grounded three pin plug. Make sure that the AC socket will
accept this grounded three pin plug. This machine must be grounded, If in doubt, call a qualified electrician.
Philipine & Thailand users:
The mains plug supplied with this machine is a side grounded two pin plug. Make sure that
the AC socket will accept this side grounded two pin plug. This machine must be grounded,
If in doubt, call a qualified electrician.
To ensure safe operation the supplied plug must be inserted only into a standard power outlet that is
properly grounded through the standard electrical wiring. None grounded equipment may cause an
electrical shock hazard, and may cause excessive electrical noise radiation.
The interface cable is not a standard accessory. Please purchase the appropriate interface cable for
the interface you intend to use (Parallel, USB or Network).
Do NOT connect the interface cable at this time. Connecting the interface cable is done during the
software installation process.
USB interface cable
Please make sure you use a USB 2.0 interface cable that is no longer than 2.0 meters.
When you use a USB cable, make sure you connect it to the USB port of your computer and not to a
USB port on a keyboard or non-powered USB hub.
Parallel interface cable
Please make sure you use a Parallel interface cable that is no longer than 2.0 meters.
Use a shielded interface cable that is IEEE 1284-compliant.
Network cable (DCP-8065DN only)
Use a straight-through Category5 (or greater) twisted-pair cable for 10BASE-T or 100Base-TX Fast
Ethernet Network.
1
. Automatic Document Feeder (ADF)
2
. Control Panel
3
. Face-down Output Tray
Support Flap (Support Flap)
4
. Front Cover
5
. Paper Tray
6
. Power Switch
7
. Document Cover
8
. ADF Document Output Support Flap
1
6
2
3
4
5
8
7
Getting Started