Filter
Top Products
4
Setting Up the machine
Do not connect the interface cable.
Connecting the interface cable is
done during the software
installation process.
1
Open the front cover by pressing the front
cover release button (1).
2
Unpack the drum unit and toner cartridge
assembly.
3
Gently rock it from side to side several times
to distribute the toner evenly inside the
cartridge.
4
Put the drum unit and toner cartridge into
the machine so that it clicks into place.
5
Close the front cover of the machine.
1 Install the Drum Unit and Toner Cartridge Assembly
(1)
Step 1