Filter
Top Products
CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
4-36
3.18 Fan Motor ASSY
NOTE:
Be sure to remove the fixing unit and disconnect the fan motor connector on the engine PCB
before removing the fan motor ASSY.
(1) Place the main frame so that the fan motor ASSY is at the top.
(2) Remove the two M3x6 Taptite screws securing the fan cover.
(3) Remove the fan motor ASSY with the fan cover and remove the fan motor ASSY from the
cover.
Fig. 4-63
NOTE:
When re-assembling the fan motor, fix the harness into the groove on the motor, then fix the
motor onto the bosses.
Fig. 4-64
Taptite, cup M3x6
Taptite, cup M3x6
Fan motor ASSY
Fan cover
Main frame
Manufacturer sticker side
Fan cover
(groove)
Fan motor