Filter
Top Products
CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
4-11
3.5 Front Cover
(1) Open the front cover.
(2) Remove the four M3x8 Taptite screws from the main cover.
Fig. 4-17
(3) Position the front cover at the angle of 45 degrees and release the bosses at the right and
left hand sides and the link at the left hand side.
(4) Remove the front cover.
Fig. 4-18
Front cover
Taptite, bind M3x8
Taptite, bind M3x8
Front cover
Front cover
Link
45
°
(boss)
(boss)
Main cover
➀
➂
➁
Step (3)