Filter
Top Products
I-5
2.4 Paper Loading
(1) Multi-purpose sheet feeder loading
Paper size: A4, Letter, Legal, B5, A5, A6, and Executive. Other sizes of media that
can be handled by the feed mechanism can be loaded.
69.8 to 229 mm
105 to 356mm (face down)
Feeding direction
Feedable paper weight: 60 (16lb.) to 158 (42lb.) g/m
2
Maximum load height : 22mm (200 sheets of 80g/m
2
paper) letter or A4 size
Setting method: Pull the MP sheet feeder cover toward you, insert the
stack of paper into the feeder, aligning the top edge of
the sheets, then push the cover back to its original
position.
(2) Manual slot loading
Paper size: Same as in (1) for the multi-purpose sheet feeder.
Feedable paper weight: Same as in (1) for the multi-purpose sheet feeder.
Setting methods: Place the side of the paper to be printed on face down
into the manual feed slot after selecting orientation. Align
the paper at the center of the manual feed slot, and be
sure to insert it fully into the feed slot. Move the paper
guide of the manual feed slot to the paper width.
Cautions:
Before loading paper with holes such as organizer sheets, be sure to fan the stack
well.
When printing on the back of pre-printed paper, be sure to straighten the paper as
much as possible.
2.5 Print Delivery
(1) With the output tray opened
Tray capacity: Maximum 100 sheets (80g/m
2
), face-down only
(2) With the output tray closed
Tray capacity: 1 sheet (80g/m
2
), face-down only
Note:
Face down: Deliver the printed face of the paper downward.
Environment : 23°C