Filter
Top Products
SAFETY INSTRUCTIONS
v
SAFETY INSTRUCTIONS
SAFETY PRINCIPLE
1) Before starting any operations, read this manual thoroughly. Especially read the safety
instructions in this section carefully and ensure that you understand the contents.
2) Perform all the operations by following the procedures described in this manual. Follow all
the cautions and warnings set out in the procedures and on safety labels affixed to the
machine. Failure to do so may result in human injury or equipment damage.
3) Perform only the procedures explained in this manual. Refrain from opening or touching
any portions that are not related to your required operation(s).
4) Repair and replacement of parts should be performed by trained and qualified persons
only. Operators should not attempt to do such repair or replacement work.
5) It must be appreciated that the above-mentioned cautions and warnings do not cover
everything because it is impossible to evaluate all the circumstances of repair situations.
SPECIAL SAFETY INFORMATION
Introductory Information
Cautions and warnings are made clear by following the ‘Safety Alert Symbols’ or ‘Signal
Words’ such as DANGER, WARNING and CAUTION.
<SAFETY ALERT SYMBOL>
This is the safety alert. When you find this symbol placed on the equipment or marked in this
manual, be aware of the potential of human injuries. Follow the recommended precautions and
safety operation practices.
<Understanding Signal Words>
DANGER is used to indicate the presence of a hazard which will cause severe human injuries
or a fatal accident if the warning is ignored.
WARNING is used to indicate the presence of a hazard or unsafe practices which may cause
severe human injuries or a fatal accident if the warning is ignored.
CAUTION is used to indicate the presence of a hazard or unsafe practices which may cause
minor human injuries if the warning is ignored. CAUTION also calls your attention to safety
messages in this manual.
<Follow Safely Instructions>
Carefully read all the safety messages set out in this manual and also in the safety warning
signs placed on the equipment. In this manual, the safety instructions (safety alert symbols and
signal words) are enclosed in a rectangular enclosure to bring them to your attention. Keep the
safety signs on the equipment in good condition and ensure none are missing or damaged.
Replace the safety signs if unreadable or damaged. Learn how to operate the equipment and
how to use the controls properly. Do not let anyone operate this equipment without following
the instructions. Keep the equipment in proper working condition. Unauthorized modification to
the equipment may impair the function & safety and affect the life of the equipment.
Listed below are the various kinds of “WARNING” messages contained in this manual.