Filter
Top Products
6 - 18 SETUP SEND
Using TX Lock
You must use a password to switch TX Lock ON and OFF.
Setting Up the TX Lock for the First Time
1
Press
Menu/Set
,
2
,
0
,
1
.
2
Enter a 4-digit number as a new
password.
3
Press
Menu/Set
.
The screen prompts you to re-enter
the password.
4
Re-enter the password and press
Menu/Set
.
5
Press or to choose
Set TX Lock
.
6
Press
Menu/Set
. The screen
prompts you to enter the password.
7
Enter a 4-digit password, followed by
Menu/Set
.
This is the same as the security password of the machine
already stored.
The screen displays
Accepted
for 2 seconds, followed by
TX Lock Mode
- TX Lock is now switched ON.
If the password you enter at Step 7 is incorrect, the screen
would display
Wrong Password
. After 2 seconds the display
will then return to normal (displaying the date & time). You must
then switch ON TX Lock again. (See
Switching TX Lock ON
on
page 6-19.)
1.TX Lock
New Passwd:XXXX
Verify:XXXX
Password:XXXX