Filter
Top Products
CHAPTER 1 INTRODUCTION
1–3
English
System Requirements
Check the following system requirements to setup and operate the printer:
• IBM PC or compatible with 80486 SX or higher microprocessor
• Parallel interface (or printer port)
• 4 MB or more of memory
• 10 MB of space available on your hard disk for the printer driver and all
fonts
• Microsoft Windows 3.1/3.11
☛ Caution
This printer has been designed specially for Windows 3.1. It cannot work
in a DOS environment, such as MS-DOS.
Features
This printer has the following features:
❏
600 dpi Resolution and 6 ppm Printing Speed
600 dots per inch (dpi) with microfine toner and six pages per minute
(ppm) printing speed (A4 or Letter size paper).
❏
User-Friendly Operation for Windows
The dedicated printer driver and TrueType™-compatible fonts for
Microsoft
®
Windows 3.1 are available on the floppy disk supplied
with your printer. You can easily install them into your Windows
system using our installer program. The driver supports our unique
compression mode to enhance printing speed in Windows applications
and allows you to set various printer settings including toner savings
mode, custom paper size, sleep mode, gray scale adjustment,
resolution and so forth. You can easily set these print options in the
graphic dialog boxes through Printer Setup within Windows Control
Panel.
❏
Printer Status Monitor with Bi-directional Parallel Interface
The printer driver can monitor your printer’s status using bi-
directional parallel communications.
The program can show the current status of your printer. When
printing, the animated dialog box appears on your computer screen to
show the current printing process. If an error occurs, a dialog box will
appear to let you know what to correct. For example: when your
printer is out of paper, the dialog box will display “Paper Empty” and
instructions for the corrective action to take.