Filter
Top Products
CHAPTER 3 PRINTER CONTROL
3–3
English
When the printer is in the Ready mode and the printer does not receive
data for a certain period of time (time-out), it automatically enters sleep
mode. The default time-out has been factory set for 5 to 15 minutes.
To awaken the printer to Ready status, press the READY↔SLEEP switch
again. Receiving a document automatically awakens the printer and
causes it to start printing.
✒ Note
• This printer has no power switch. The sleep mode handles the power
control.
• When the printer first enters sleep mode, the fan will not stop until the
printer engine has cooled down.
• Sleep mode allows the print engine to cool, so the temperature of your
room and the amount of time the printer has been in sleep mode
affects the warm-up time. Warm-up time can take about 60 seconds.
The READY lamp blinks to indicate that the printer is warming up.
• You can change the time-out for sleep mode with the printer driver.
For more information, open the Setup dialog box of your printer
driver in the Windows Control Panel and choose Help or press the F1
key.
Test Page
When you hold down the READY↔SLEEP switch for about 3 seconds,
the printer will print a test page. You can check the print condition or
print quality with it.