Filter
Top Products
Confidential
9-36
I-11 Faulty registration
Possible cause
Step
Check
Result
Remedy
Excessive
paper load
1 Is the paper loaded in the
paper tray more than 27mm
high?
Yes Instruct the user to keep paper
loads below 27mm in depth.
2 Is the specified weight of
the recommended paper
being used?
No Recommend to use the specified
types of paper.
Print paper
3 Is the first printing position
within ±1mm of the
tolerance specification?
Yes Adjust the Y offset by using the
utility software supplied.
Regist rear
sensor
position
incorrect
4 Is the regist rear sensor off
from the correct position?
Yes Reposition the sensor to the
correct position.
Drum unit
failure
5 Is the rotation torque of the
drum unit heavy?
Yes Replace the drum unit.