Filter
Top Products
App. 4-31 Confidential
WSW27
(Function setting 5)
Selector
No.
Function Setting and Specifications
1 Not used.
2 Ringer OFF setting 0: Yes 1: No
3
Automatic playback of OGM when
switched to the TAD mode
0: No 1: Yes
4
5
Detection of distinctive ringing
pattern
(Not used.)
0: Yes 1: No
6 Recording quality 0: Normal 1: High
7
Recording time for high recording
quality
0: Short 1: Long
(9.6 kbps) (8.8 kbps)
8 Not used.
NOTE: Selectors 4 and 5 are applicable to the U.S.A. models only.
Selector 2: Ringer OFF setting
This selector determines whether or not the ringer can be set to OFF.
Selector 3: Automatic playback of OGM when switched to the TAD mode
This selector determines whether or not to automatically play back an OGM the moment the
machine switches to the TAD mode.
Selectors 4 and 5: Detection of distinctive ringing pattern (Not used.)
If this selector is set to "1," the machine detects only the number of rings; if it is set to "0," the
machine detects the number of rings and the ringing time length to compare the detected ringing
pattern with the registered distinctive one.
Selector 6: Recording quality
This selector determines the recording quality for the OGM and ICM. Selecting "1" (High)
increases the quality, sacrificing the recording time.
Selector 7: Recording time for high recording quality
This setting takes effect when selector 6 is set to "1" (High). Setting this selector to "0" (Short)
further increases the recording quality, sacrificing the recording time.
The recording quality and time to be applied when this selector is set to "1" (Long) are higher and
shorter than the ones to be applied when selector 6 is set to "0" (Normal).
The recording quality and time determined by this selector being set to "1" (Long) are higher and
shorter than the ones determined by selector 6 being set to "0" (Normal).