Filter
Top Products
Troubleshooting and routine maintenance
91
C
Reset C
You can reset all the machine settings back to
the settings that were set at the factory.
Brother strongly recommends you perform
this operation when you dispose of the
machine.
Note
Unplug the interface cable before you
reset.
a Press Menu, 1, 7, 1.
b Press 1 or 2 to choose 1.Reset or
2.Exit.
c If you choose 1.Reset in step b, you
will be asked to reboot the machine.
Press 1 or 2 to choose 1.Yes or 2.No.
If you choose 1.Yes, the machine will
begin the Reset.
Packing and shipping
the machine C
CAUTION
Make sure that the machine has fully
cooled down by leaving it disconnected
from the power for at least 30 minutes
before packing.
When you transport the machine, use the
packing materials that came with your
machine. If you do not pack the machine
correctly, you could void your warranty.
a Turn off the machine.
b Unplug all the cables and AC power
cord from the machine.
c Press the front cover release button and
open the front cover.
d Take out the drum unit and toner
cartridge assembly. Leave the toner
cartridge installed in the drum unit.
e Put the drum unit and toner cartridge
assembly into a plastic bag and seal the
bag.
f Close the front cover.