Filter
Top Products
GLOSSARY G - 4
OCR (optical character recognition) (MFC-3240C and
MFC-3340CN only) The bundled ScanSoft
®
OmniPage
®
software
application converts an image of text to text you can edit.
One-Touch Keys on the machine’s control panel where you can
store numbers for easy dialing. You can store a second number
on each key if you press
Shift
and the One-Touch Key together.
Out of Paper Reception Receives faxes into the machine’s
memory when the machine is out of paper.
Overseas Mode Makes temporary changes to the fax tones to
accommodate noise and static on overseas phone lines.
Paging This feature enables your machine to call your pager when
a fax is received into its memory. The FAX-1940CN will also page
for voice messages.
Pause Allows you to place a 3.5 second delay in the dialing
sequence stored on One-Touch keys and Speed-Dial numbers.
Press
Redial/Pause
as many times as needed for longer
pauses.
PhotoCapture Center
™
(MFC-3340CN only) Allows you to print
digital photos from your digital camera at high resolution for photo
quality printing.
Photo resolution A resolution setting that uses varying shades of
gray for the best representation of photographs.
Polling The process of a fax machine calling another fax machine
to retrieve waiting fax messages.
Pulse A form of rotary dialing on a telephone line.
Quick Dial List A listing of names and numbers stored in
One-Touch and Speed-Dial memory, in numerical order.
Real Time Transmission When memory is full, you can send faxes
in real time.
Remaining jobs You can check which jobs are waiting in memory
and cancel jobs individually.
Remote Access Code Your own four-digit code (--- ) that allows
you to call and access your machine from a remote location.
Remote Retrieval Access The ability to access your machine
remotely from a touch tone phone.