Filter
Top Products
4 - 7 SETUP RECEIVE
Setting the F/T Ring Time (Fax/Tel mode only)
If you set the Receive Mode to Fax/Tel, you’ll need to decide how long
the machine will signal you with its special pseudo/double-ring when
you have a voice call. (If it’s a fax call, the machine prints the fax.)
This pseudo/double-ring happens after the initial ringing from the
phone company. Only the machine rings and no other phones on the
same line will ring with the special pseudo/double-ring. However, you
can still answer the call on any telephone. (See Fax/Tel mode when
power key is On
on page A-8 and
Fax/Tel mode when power key is Off
on page A-8.)
1
If it is not illuminated in green, press (
Fax
).
2
Press
Menu/Set
,
2
,
1
,
2
.
3
Press
▲
or
▼
to select how long the
machine will ring to alert you that you have a voice call (20, 30,
40 or 70 seconds).
Press
Menu/Set
.
4
Press
Stop/Exit
.
Setting the Fax/Tel Announcement
(FAX-1940CN only)
For the Fax/Tel receive mode, you can set up the machine to play an
outgoing announcement for callers when no one is there to answer
calls. (See
Record Fax/Tel Outgoing Announcement (F/T OGM)
on
page 7-7.)
Even if the caller hangs up during the pseudo/double-ringing,
the machine will continue to ring for the set time.
2.F/T Ring Time