Brother FAX-1840C Fax Machine User Manual


 
REMOTE FAX OPTIONS 6 - 8
95 Change the Fax
Forwarding, Paging or Fax
Storage settings
1 OFF You can select
Off
after you have retrieved
or erased all your messages.
2 Fax Forwarding If you hear one long beep, the change has
been accepted. If you hear three short beeps,
you cannot change it because something has
not been set up (for example, perhaps a Fax
Forwarding or paging number had not been
registered). You can register your Fax
Forwarding number by entering 4.
(See
Changing your Fax Forwarding number
on page 6-10.) Once you have registered the
number, Fax Forwarding will work.
You can select
Off
after you have retrieved
or erased all your messages.
3 Paging
4 Fax Forwarding number
6 Fax Storage
96 Retrieve a fax
2 Retrieve all faxes Enter the number of a remote fax machine to
receive stored fax message(s). (See page
6-10.)
3 Erase faxes from the
memory
If you hear one long beep, fax messages
have been erased from the memory.
97 Check the receiving status
(Except for FAX-1940CN)
1 Fax
You can check whether your machine has
received any faxes. If yes, you will hear one
long beep. If no, you will hear three short
beeps.
97 Check the receiving status
(FAX-1940CN only)
You can check whether your machine has
received any fax or voice messages. If yes,
you will hear one long beep. If no, you will
hear three short beeps.
1 Fax
2 Voice
Remote commands Operation details