Filter
Top Products
23
ON-SCREEN PROGRAMMING
2. SETUP RECEIVE
Function Description Factory Set Chapter
1. RING DELAY Number of rings before the
RING DELAY:02
5
machine answers in F/T, FAX
TOLL SAVER:OFF
or TAD (Message Manager) (FAX-525DT
mode. Only)
2. F/T RING TIME Sets the time for “F/T pseudo- 30 5
ring” in F/T mode.
3. FAX DETECT Receive fax messages without ON 5
pressing the Start key.
4. REMOTE CODE Enter code to activate or OFF 5
deactivate the machine from a (
51, #51,
remote location or to transfer
81)
voice call from DECT cordless
phone to the machine.
5. POLLING RX You call another fax machine to -- 5
receive a fax from it.
6. PC INTERFACE Fax Receive Only/PC Priority/
PC PRIORITY
5
(With MFL Pro for Fax) PC Receive Only
(For FAX-525DT Only)
3. SETUP SEND
Function Description Factory Set Chapter
1. CONTRAST Change lightness or darkness of AUTO 6
a fax you are sending.
2. RESOLUTION Allows you to change STANDARD 6
resolutions page by page.
3. OVERSEAS MODE Adjusts for sometimes difficult OFF 6
overseas transmissions.
4. TIMER Send documents later. -- 6
5. POLLED TX Set Polled Transmission for -- 6
someone to poll your fax
machine to receive a fax.