Filter
Top Products
41
SETUP RECEIVE
For F/T (Fax/Tel) Mode Only
When the machine is in F/T mode, it will use the F/T Ring Time (F/T
pseudo-ringing) to alert you to a voice call. If you’re at the machine, you
can lift the handset to answer.
If you’re at an extension phone, you’ll need to lift the handset during the
F/T Ring Time and press # 5 1 between the F/T pseudo-rings. If no one
is on the line, or if someone wants to send you a fax, send the call back
to the machine by pressing
5 1.
Remote Call Transfer
In order to set the Remote Activation, you should first set Menu, 2, 4
REMOTE ACT to ON (see Changing Remote Codes).
This function works when you receive the incoming Voice call at the
remote DECT cordless phone externally connected to the fax machine.
You can transfer voice call to the fax machine. But you can not transfer
the incoming voice call from the fax machine to the DECT cordless
phone.
To transfer telephone call to the fax machine
When you pick up the voice call at remote DECT cordless phone and
would like to transfer it to the fax machine,
1
Press Activation Voice Code 8 1 at remote cordless phone.
2
The fax machine rings (pseudo-ring same as current F/T ring) and
the display shows “PICK UP PHONE”.
3
Pick up the handset and press Tel or Speaker Phone––OR––just
press Speaker Phone at the fax machine in order to transfer the
voice call to the fax machine.
Don’t hang up the call from the cordless phone until the voice call has
been transferred to the fax machine. You will know when this is because
you will no longer be able to hear or talk to the caller via the cordless
phone. If you do not wait until this point before hanging up from the
cordless phone, the call will be lost.
If nobody answers at the fax machine, pseudo-ringing stops after 30
seconds. In that case, it may still be possible to speak with the caller
from the cordless phone. Speech between the fax machine and the
cordless phone (= intercom) is not possible.
See
“Connecting
an External
Telephone”
chap. 2