Filter
Top Products
31
INITIAL SETUP
PABX and TRANSFER
Your machine is initially set to be connected with PSTN (Public
Switched Telephone Network) lines. However many offices use a central
telephone system or Private Automatic Branch Exchange (PABX). Your
fax can be connected to most types of PABX. You can gain access to the
outside line from your fax connected to PABX by just pressing R.
You can transfer a call to another extension by pressing R.
If your fax machine is connected to a PABX, you may need to insert an
additional number prefix (e.g. “9”) and a “pause”, do not press R, before
each fax or telephone number, in order to again access to the outside line.
Setting PABX
If your machine is connected to a PABX system, set PBX:ON. If not, set
to OFF.
1
Press Menu, 1, 5. The screen displays
PBX:OFF
SELECT { } & SET
2
Press Z or X to select ON (or OFF).
3
Press Set when the screen displays your selection.
4
Press Stop to exit.
You can program an R keypress as part of a number stored in a One
Touch or Speed Dial location. When programming the One Touch or
Speed Dial number (Function menu 6-1 or 6-2) press R first (the screen
displays “!”), then enter the telephone number. If you do this, you do not
need to press R each time before you dial using a One Touch or Speed
Dial location. (See chapter 7.) However, if PBX is set to OFF, you can’t
use the One Touch or Speed Dial number that an R keypress is
programmed into.
Setting the Clock Change
You can easily let the machine’s clock gain or lose one hour by using this
feature.
1
Press Menu, 1, 6. The screen displays
TO SUMMER TIME ?
SELECT { } & SET