Filter
Top Products
INITIAL SETUP
4 - 4
Setting the Speaker Volume
You can adjust the speaker volume by pressing Speaker Phone, and then selecting
a speaker volume level.
Press to adjust the volume level. The LCD shows the setting you are choosing.
Each key press changes the volume to the next setting. The new setting will remain
until you change it again.
Choosing the Handset Volume (For Volume Amplify)
Before you begin to use the machine, you must decide if you need to set the handset
volume to AMPLIFY:ON for a user who is hearing-impaired. The AMPLIFY
volume level complies with FCC standards.
VOLUME AMPLIFY: OFF
This default setting is appropriate if none of the users are hearing-impaired. During a
conversation, users can press Volume on the control panel to adjust the volume
to LOW or HIGH. When the handset is replaced, the handset volume will remain
until you change it again.
VOLUME AMPLIFY: ON–TEMPORARY
This setting is appropriate if some of the users are hearing-impaired. During a
conversation, users can press Volume on the control panel to adjust the volume
to LOW, HIGH or AMPLIFY. When the handset is replaced, the handset volume
returns to the default setting of LOW.
VOLUME AMPLIFY:ON–PERMANENT
Choose VOL AMPLIFY:ON–PERMANENT if all of the users are hearing-
impaired. During a conversation, users can press Volume on the control panel to
adjust the volume to LOW, HIGH or AMPLIFY. When the handset is replaced, the
handset volume returns to the default setting of AMPLIFY.
m
You can adjust the speaker volume while you are listening to your OGM (Outgoing
Message) and ICMs (Incoming Messages).
If you turn Incoming Recording Monitor to OFF (
Menu/Set
,
8
,
5
) the Speaker for
screening calls with be disabled and you won’t hear callers leaving messages. The
volume for other operations can still be controlled using .
When you press Volume on the control panel to adjust the volume, the LCD shows
the setting you are choosing. Each key press changes the volume to the next setting.
or
or
or
or
or
or