Filter
Top Products
9 - 7
MESSAGE CENTER
Recording a Conversation
You can record a telephone conversation by pressing Play/Record during the
conversation. Your recording can be as long as the Incoming Message Maximum
Time. You and the other party will hear a beep every 15 seconds while recording. To
stop recording, press Stop/Exit. You cannot record a conversation using Speaker
Phone.
Fax Forwarding/Paging
When Paging is set to ON, your fax machine dials the pager number you’ve
programmed, and dials your Personal Identification Number (PIN) when connected,
this activates your pager and lets you know you have a fax or voice message in the
Message Center memory.
When Fax Forwarding is set to ON, your fax machine dials the fax machine phone
number you’ve programmed and forwards any faxes you’ve received.
Programming a Fax Forwarding Number
1
Press Menu/Set, 8, 6.
2
Press until the LCD shows FAX
FORWARD?, and then press Menu/Set.
3
Enter the number of the fax machine where
faxes will be forwarded (up to 20 digits), and
then press Menu/Set.
4
Press Stop/Exit.
You can not use Paging and Fax Forwarding at the same time.
You can change a Fax Forwarding number remotely. (See Changing Fax Forwarding
Number, page 9-12.)
6.FAX FWD/PAGING
or
FWD#:
ENTER & SET