Filter
Top Products
MESSAGE CENTER
9 - 2
Setting Up the Message Center
You must set up the Message Center in the following order:
1
Setting Message Storage.
(See Setting Message Storage, page 9-2.)
2
Record Message Center Outgoing Message (MSG CTR OGM).
(See Recording Message Center Outgoing Message, page 9-2.)
3
Activate Message Center Mode.
(See Activating Message Center Mode, page 9-3.)
Setting Message Storage
Read the Flexible Memory Settings descriptions on page 9-1 before you select the
FAX and VOICE settings below.
1
Press Menu/Set, 8, 1.
2
Press to select ON (or OFF),
and then press Menu/Set.
3
Press to select your setting from the list on
pages Flexible Memory Settings (Message Storage), page 9-1 (ON, EXT, OFF) and
then press Menu/Set.
4
Press Stop/Exit to exit.
Recording Message Center Outgoing Message
Recording the Message Center Outgoing Message (MSG CTR OGM) is the second
step you need to follow before you can turn on the Message Center. Make sure your
OGM is less than 20 seconds long.
1
Press Menu/Set, 8, 3.
The LCD prompts you to choose an OGM.
2
Press to select MSG CTR OGM? (not F/T
OGM), and then press Menu/Set.
This is the only setting you can select if you want to turn on the Message Center.
3
Press to select RECORD OGM?, and then press Menu/Set.
1.MSG STORAGE
FAX:OFF?
or
VOICE:ON?
or
3.OGM
MSG CTR OGM?
or
or