Filter
Top Products
A–28
Radio Interference (220-240 V Model Only)
This printer complies with EN55022(CISPR Publication 22)/Class B.
Before this product is used, ensure that you use a double-shielded interface
cable with twisted-pair conductors and that it is marked “IEEE 1284-
compliant.” We recommend to use a parallel cable that is 2.0 meters (6 1/2
feet) or less.
IMPORTANT - For Your Safety
To ensure safe operation the three-pin electrical plug supplied must be
inserted only into a standard three-pin power point that is properly grounded
through normal household wiring.
Extension cords used with the equipment must be three-pin plug type and
correctly wired to provide proper grounding. Incorrectly wired extension
cords may cause personal injury and equipment damage.
The fact that the equipment operates satisfactorily does not imply that the
power is grounded and that the installation is completely safe. For your
safety, if in any doubt about the effective grounding of the power, consult a
qualified electrician.
Disconnect Device
This printer must be installed near a power outlet that is easily accessible. In
case of emergencies, you must disconnect the power cord from the power
outlet in order to shut off power completely.