Filter
Top Products
16
Windows
®
Wireless Network
9
Confirm your network environment (Infrastructure Mode)
The setup process will be different depending on your network environment.
Configuration using the Brother automatic installer application on the CD-ROM
(Recommended)
Configuration temporarily using a network cable
You need to temporarily use an Ethernet cable when you configure your Brother printer with this
method. The Ethernet cable is not a standard accessory.
If there is an Ethernet Hub or Router in the same network as the wireless access point a of your printer, you can
temporarily connect the Hub or Router to the printer using an Ethernet cable
b, this is an easy way to configure the
printer. You can then remotely configure the printer from a computer on the network.
Now go to
For Windows
®
Users go to
page 17
For Macintosh
Users go to
page 22
Configuration using the SES/WPS/AOSS™ from the control panel menu to configure your printer for a
wireless network
If your wireless access point a supports either SecureEasySetup™, Wi-Fi Protected Setup (PBC
1
) or AOSS™, you do
not need to use a computer to configure the wireless settings. The access point/router and your printer can automatically
negotiate using the SecureEasySetup™, Wi-Fi Protected Setup or AOSS™ procedure.
1
Push Button Configuration
For instructions, see Chapter 6 in the Network User’s Guide on the CD-ROM
Configuration using the PIN Method of Wi-Fi Protected Setup
If your wireless access point a supports Wi-Fi Protected Setup you can also configure using the PIN Method of
Wi-Fi Protected Setup. For instructions, see Chapter 7 in the Network User’s Guide on the CD-ROM.
1
1
1