Filter
Top Products
18
Windows
®
Wireless Network
f Choose Wireless Setup and Driver Install
(Recommended), and then click Next.
g Choose Step by Step install
(Recommended) and then click Next.
h Choose With cable (Recommended) and
then click Next.
i Connect your Brother wireless device (your
printer) to your access point using a network
cable and then click Next.
j Choose the printer you wish to configure, and
click Next. If the list is blank, check if the
access point and the printer are powered on,
and then click Refresh.
k The wizard will search for wireless networks
available from your printer. Choose the access
point you wish to associate the printer with
(The SSID you wrote down on page 17), and
then click Next
Note
For Windows Vista
®
, when the User Account
Control screen appears, click Allow.
Note
• The default Node name is “BRNxxxxxxxxxxxx”.
• You can find your printer’s MAC Address
(Ethernet Address) and the IP Address by
printing out the Printer Settings Page.