Filter
Top Products
23
MacintoshWireless Network
Windows
®
Macintosh
Wireless Network
g Choose Step by Step install
(Recommended) and then click Next.
h Choose With cable (Recommended) and
then click Next.
i Connect the Brother printer to you access point
using a network cable and click Next.
j Choose the printer you wish to configure, and
click Next. If the list is blank, check if the
access point and the printer are powered on,
and then click Refresh.
k The wizard will search for wireless networks
available from your printer. Choose the access
point you wish to associate the printer with, and
then click Next.
l If your network is not configured for
Authentication and Encryption, the following
screen will appear. To continue configuration,
click OK and go to n.
Note
• The default Node name is “BRNxxxxxxxxxxxx”.
• You can find your printer’s MAC Address
(Ethernet Address) and the IP Address by
printing out the Printer Settings Page.
Note
• SETUP is the default SSID of the printer. Do
not choose this SSID.
• If the list is blank, check that the access point
has power and is broadcasting the SSID, and
then see if the printer and the access point are
within range for wireless communication. Then,
click Refresh.
• If your access point is set to not broadcast the
SSID you can manually add it by clicking the
Add button. Follow the on-screen instructions
for entering the Name (SSID), and then click
Next.