Filter
Top Products
25
MacintoshWireless Network
Windows
®
Macintosh
Wireless Network
q Disconnect the network cable between your
access point (hub or router) and the printer,
and click Next.
Install the printer driver
r The driver installation starts.
Follow the on-screen instructions. Then, restart
your Macintosh.
s The Brother software will search for the Brother
printer. During this time the following screen
will appear.
t Choose the printer you wish to connect, and
then click OK.
If
u When this screen appears, click OK.
j
IMPORTANT
• DO NOT try to cancel any of the screens
during this installation.
• If your wireless settings fail, an error
message will appear during the installation
of the printer driver and the installation will
be terminated. If you encounter this failure,
reset the print server back to its factory
default settings, and please go back to
step d on page 22 and setup the wireless
connection again.
Note
Please see the User’s Guide on the CD-ROM to
install the PS driver (Brother’s BR-Script Driver).
Note
• If there is more than one of the same printer
model connected on your network, the
MAC Address (Ethernet Address) will be
displayed after the model name.
• You can find your printer’s MAC Address
(Ethernet Address) and the IP Address by
printing out the Printer Settings Page.
• If your printer fails to appear on the list, reset
the print server back to its factory default
settings and go back to d on page 22 and try
the wireless setup again.
Finish
The installation is now
complete.