Filter
Top Products
Driver and Software
42
2
Color Calibration 2
The output density of each color may vary depending on the temperature and humidity of the environment
the machine is in. This setting helps you to improve color density by letting the printer driver use the color
calibration data stored in your machine.
Use Calibration Data
If you select this check box, the printer driver will use the calibration data retrieved from the machine to set
color matching in the printer driver. This will ensure consistent print quality.
Get Device Data Automatically
If you select this check box, the printer driver will use the color calibration data from your machine.
Start Color Calibration
If you click this button, your machine will start the color calibration, and then the printer driver will use the
calibration data from your machine.
Use Reprint 2
The machine stores the print jobs sent to it in memory. You can reprint the last job without sending the data
again from your computer. For more information about the Reprint function, see Reprinting documents
on page 98.
NOTE
To prevent other people from printing your data using the Reprint function, deselect the Use Reprint
check box.