Filter
Top Products
Control panel setup
117
10
Restoring the network settings to factory default 10
If you wish to reset the print server back to its default factory settings (resetting all information such as the
password and IP address information), please follow these steps:
a Make sure that the power cord is plugged in.
b Turn on the printer and wait until the printer is in the Ready state.
c Press any of the Menu buttons (+, -, OK or Back) of the control panel on your printer to take the printer
off-line.
d Press the + or - button to choose LAN. Press OK.
e Press the + or - button to choose Factory Reset. Press OK.
f Press OK again.
Note
You can reset the print server back to its default factory settings using the BRAdmin application or Web
Based Management (web browser). For more information, see Changing the print server
settings on page 15.