Filter
Top Products
Wireless configuration for Macintosh
®
using the Brother automatic installer application
70
5
4 Press the + or - button to select WLAN.
LAN
WLAN
5 Press OK to move to the next menu level.
WLAN
TCP/IP
6 Press the + or - button to select Setup WLAN.
WLAN
Setup WLAN
7 Press OK to move to the next level.
Setup WLAN
Setup Wizard
8 Press the + or - button to select SecureEasySetup.
Setup WLAN
SecureEasySetup
9 Press OK.
If the following message appears, press OK again.
WLAN Enable?
On
Note
The message above only appears when the wireless setting is disabled.
10 The wireless network connection status using the SecureEasySetup™ software will be displayed
on the control panel; Connecting WLAN, Connected or Connection NG.
Connecting WLAN is displayed when the print server is trying to make connections to your router
or access point. Wait till either Connected or Connection NG is displayed.
Connected is displayed when the print server is successfully connected to your router or access
point. You can now use your printer in a wireless network.
Connection NG is displayed when the print server has not successfully connected to your router
or access point. Try starting from a again. If the same message is displayed again, reset the print
server back to the default factory settings and try again.
Note
If the LCD shows Connection NG, please try again.