Filter
Top Products
Troubleshooting
154
13
Where ipaddress is the print server IP address (note that in some instances it can take up to
two minutes for the print server to load its IP address after setting the IP address).
e If you have tried a to d above and it does not work, then reset the print server back to the default factory
settings and try from the initial setup again. For information on how to reset to the default factory settings,
see Restoring the network settings to factory default on page 117.
f (For Windows
®
) If the installation failed, the Firewall on your computer may be blocking the necessary
network connection to the printer. In this case, you will need to disable the Firewall on your computer
and re-install the drivers. For information on how to disable the Firewall, see For
Windows
®
on page 151.