Filter
Top Products
Configuring your printer for a wireless network (For HL-4070CDW)
30
3
o Select the Authentication method using the + or - button, and press OK.
If you select Open System, go to step p.
If you select Shared Key, go to step q.
If you select WPA/WPA2-PSK, go to step t.
If you select LEAP, go to step u.
Auth. Select
Open System *
Note
For more information on Authentication method, see Authentication and encryption on page 20.
p Select the Encryption Type, None or WEP using the + or - button, and press OK.
If you select None, go to step w.
If you select WEP, go to step q.
Encryption Type?
None *
q Select the key option; KEY1, KEY2, KEY3, KEY4 using the + or - button, and press OK.
If you select the key which shows **********, go to step r
If you select a blank key, go to step s.
Set WEP KEY
KEY1:**********
r If you want to change the key you selected in step q, select Change using the + or - button, press OK.
Go to step s.
If you want to keep the key you selected in step q, select Keep using the + or - button, press OK. Go to
step w.
KEY1:**********
Change
s Enter a new WEP key using the + or - button, and press OK. Go to step w.
WEP:
_
t Select the Encryption Type, TKIP or AES using the + or - button and press OK. Go to step v
Encryption Type?
TKIP
u Enter the user name using the + or - button, and press OK. Go to step v.
USER:
_
v Enter the password and press OK. Go to step w.
PASS:
_