Brother MFC-7860DW All in One Printer User Manual


 
Sending a fax
15
3
Changing Fax Resolution 3
The quality of a fax can be improved by
changing the Fax Resolution. Resolution can
be changed for the next fax or for all faxes.
To change the Fax Resolution setting
for the next fax
3
a Make sure you are in Fax mode .
b Load your document.
c Press Resolution, then a or b to
choose the resolution.
Press OK.
To change the default Fax Resolution
setting
3
a Make sure you are in Fax mode .
b Press Menu, 2, 2, 2.
Setup Send
2.Fax Resolution
c Press a or b to choose the resolution
you want.
Press OK.
Note
You can choose four different resolution
settings.
Additional sending
operations 3
Sending a fax manually 3
Manual transmission 3
Manual transmission lets you hear the
dialing, ringing and fax-receiving tones while
sending a fax.
a Make sure you are in Fax mode .
b Load your document.
c Press Hook and listen for a dial tone.
Or, pick up the handset of the external
telephone and listen for a dial tone.
d Dial the fax number you want to call.
e When you hear the fax tone, press
Start.
If you are using the scanner glass,
press 1 to send a fax.
f If you picked up the handset of an
external telephone, replace it.
Sending a fax at the end of a
conversation 3
At the end of a conversation you can send a
fax to the other party before you both hang
up.
a Ask the other party to wait for fax tones
(beeps) and then to press the Start or
Send key before hanging up.
b Make sure you are in Fax mode .
c Load your document.
fax resolution
Standard Suitable for most typed
documents.
Fine Good for small print and
transmits a little slower than
Standard resolution.
S.Fine Good for small print or artwork
and transmits slower than Fine
resolution.
Photo Use when the document has
varying shades of gray or is a
photograph. This has the
slowest transmission time.