Brother MFC-7860DW All in One Printer User Manual


 
64
Menu mode
Programming mode for changing your
machine’s settings.
OCR (optical character recognition)
Presto! PageManager software
application converts an image of text to
text you can edit.
One Touch
Keys on the machine’s control panel
where you can store numbers for easy
dialing. You can store a second number
on each key if you press Shift and the
One Touch key together.
Out of Paper Reception
Receives faxes into the machine’s
memory when the machine is out of paper.
Overseas Mode
Makes temporary changes to the fax
tones to accommodate noise and static on
overseas telephone lines.
Paging
This feature enables your machine to call
your pager when a fax is received into its
memory.
Pause
Allows you to place a 3.5 second delay in
the dialing sequence while you are dialing
using the dial pad or while you are storing
One Touch and Speed Dial numbers.
Press Redial/Pause as many times as
needed for longer pauses.
Polling
The process of a fax machine calling
another fax machine to retrieve waiting fax
messages.
Real Time Transmission
When memory is full, you can send faxes
in real time.
Remaining Jobs
You can check which programmed fax
jobs are waiting in the memory and cancel
the jobs individually.
Remote Access Code
Your own four-digit code (– – –l) that
allows you to call and access your
machine from a remote location.
Remote Retrieval Access
The ability to access your machine
remotely from a touch tone telephone.
Resolution
The number of vertical and horizontal lines
per inch.
Ring Delay
The number of rings before the machine
answers in Fax Only and Fax/Tel
modes.
Ring Volume
Volume setting for the machine’s ring.
Scanning
The process of sending an electronic
image of a paper document into your
computer.
Speed Dial
A pre-programmed number for easy
dialing. Press (Address Book), then
enter the three-digit Speed Dial location
and press Start to begin the dialing
process.
Station ID
The stored information that appears on
the top of faxed pages. It includes the
sender’s name and fax number.
TAD (telephone answering device)
You can connect an external device or
answering machine to the EXT. jack of
your machine.
Telephone Answer Code
(Fax/Tel mode only)
When the machine answers a voice call, it
pseudo/double-rings. You can pick up at
an extension telephone by pressing this
code (#51).