Brother MFC-7860DW All in One Printer User Manual


 
1
1
1
Memory Storage 1
Your menu settings are stored permanently,
and in the event of a power failure will not be
lost. Temporary settings (for example,
Contrast, Overseas Mode) will be lost.
(For MFC-7860DW)
During a power failure the machine will retain
the date and time and programmed fax timer
jobs (for example, Delayed Fax) for
approximately 60 hours. Other fax jobs in the
machine’s memory will not be lost.
(For MFC-7360 and MFC-7460DN)
During a power failure the machine will retain
the date and time for approximately 2 hours.
The fax jobs in the machine’s memory will be
lost.
Volume settings 1
Ring volume 1
You can choose a ring volume level from a
range of settings, from High to Off.
While in Fax mode press or to adjust
the volume level. The LCD will show the
current setting, and each key press will
change the volume to the next level. The
machine will keep the new setting until you
change it.
You can also change the ring volume through
the menu:
a Press Menu, 1, 3, 1.
Volume
1.Ring
b Press a or b to choose Off, Low, Med or
High.
Press OK.
c Press Stop/Exit.
Beeper volume 1
When the beeper is on, the machine will beep
when you press a key, make a mistake, or
after you send or receive a fax. You can
choose a range of volume levels, from High
to Off.
a Press Menu, 1, 3, 2.
Volume
2.Beeper
b Press a or b to choose Off, Low, Med or
High.
Press OK.
c Press Stop/Exit.
General Setup 1