Filter
Top Products
Chapter 1
6
Dial Prefix 1
The Dial Prefix setting will automatically dial a
predefined number before every fax number
you dial. For example: If your telephone
system requires a 9 to dial an outside number
use this setting to automatically dial 9 for
every fax you send.
Setting up the prefix number 1
a Press Menu.
b Press a or b to display
Initial Setup.
Press Initial Setup.
c Press a or b to display Dial Prefix.
Press Dial Prefix.
d Do one of the following:
If you want to set the dial prefix
feature to on, press On. Go to
step e.
If you want to set the dial prefix
feature to off, press Off. Go to
step g.
e Press Dial Prefix.
f Enter the prefix number (up to 5 digits)
by pressing the buttons on the
Touchscreen.
Press OK.
Note
• You can use the numbers and symbols 0
to 9, #, and l. (You cannot use ! with any
other numbers or symbols.)
• If your telephone system requires a time
break recall (hookflash), press ! on the
Touchscreen.
• (Canada only) If pulse dialing mode is on,
# and l are not available to use.
g Press Stop/Exit.
Changing the prefix number 1
a Press Menu.
b Press a or b to display
Initial Setup.
Press Initial Setup.
c Press a or b to display Dial Prefix.
Press Dial Prefix.
d Press On (or Off).
You can turn off the prefix number by
pressing Off. The prefix number will
remain off until you press On.
e Press Dial Prefix.
f Do one of the following using the buttons
on the Touchscreen.
To change the prefix number, press
d or c to position the cursor under the
digit to be deleted and press the
Back Space button . Then press
the correct digit.
Repeat until the prefix number is
correct, and then press OK.
To exit without making a change,
press OK.
Note
• You can use the numbers and symbols 0
to 9, #, and l. (You cannot use ! with any
other numbers or symbols.)
• If your telephone system requires a time
break recall (hookflash), press ! on the
Touchscreen.
• (Canada only) If pulse dialing mode is on,
# and l are not available to use.
g Press Stop/Exit.