Brother MFC-8950DW Copier User Manual


 
Dialing and storing numbers
45
5
Additional ways to
store numbers 5
Setting up Groups for
Broadcasting 5
If you often want to send the same fax
message to many fax numbers you can set
up a Group.
Groups are stored on a One Touch button or
a Speed Dial number. Each Group uses up a
One Touch button or a Speed Dial location.
You can then send the fax message to all the
numbers stored in a Group just by pressing a
One Touch button or entering a Speed Dial
number, pressing Send a fax or
Send a E-mail, and then pressing Start.
Before you can add numbers to a Group, you
need to store them as One Touch or Speed
Dial numbers. You can set up to 20 small
Groups, or you can assign up to 331 numbers
to one large Group.
For a listing of the options available when you
set up Group numbers, see the table on
page 47.
a Press (Address Book).
b Press Edit.
c Press Setup Groups (One Touch)
or Setup Groups (Speed Dial) to
choose where you want to store the new
Group.
Note
The machine automatically allocates an
available Speed Dial number or One
Touch Dial location for the new Group.
d Do one of the following:
Press OK to accept the displayed
One Touch or Speed Dial number.
Enter a new number using the
buttons on the Touchscreen.
Press OK.
e Enter the Group name (up to 15
characters) by pressing the buttons on
the Touchscreen.
Press to choose numbers, letters or
special characters. (See Basic User's
Guide: Entering text.)
Press OK.
f Do one of the following:
Press OK to accept the displayed
Group number.
Enter a new Group number using the
buttons on the Touchscreen.
Press OK.
g To select the Registration Type (Dial
type) and the file type, press d or c to
display
Fax/IFAX,
E-Mail B&W PDF,
E-Mail B&W TIFF,
E-Mail Color PDF,
E-Mail Color JPEG,
E-Mail Color XPS,
E-Mail Gray PDF,
E-Mail Gray JPEG,
E-Mail Gray XPS.
Press the option you want.