Brother MFC-7840W All in One Printer User Manual


 
146
5.LAN
(MFC-7840W
only)
(continued)
1.Wired
(continued)
2.Ethernet Auto*
100B-FD
100B-HD
10B-FD
10B-HD
Chooses the Ethernet
link mode.
See
Network
User’s
Guide
on the
CD
-
ROM.
3.Set to
Default
1.Reset
2.Exit
Restore the wired
network setting to
factory default.
4.Wired
Enable
On*
Off
Enable or Disable the
Wired LAN manually.
2.WLAN 1.TCP/IP 1.BOOT Method Auto*
Static
RARP
BOOTP
DHCP
Chooses the BOOT
method that best suits
your needs.
2.IP Address [000-255].
[000-255].
[000-255].
[000-255]
Enter the IP address.
3.Subnet Mask [000-255].
[000-255].
[000-255].
[000-255]
Enter the Subnet mask.
4.Gateway [000-255].
[000-255].
[000-255].
[000-255]
Enter the Gateway
address.
5.Node Name BRW
XXXXXXXXXXXX
Enter the Node name.
6.WINS Config Auto*
Static
Chooses the WINS
configuration mode.
7.WINS Server (Primary)
000.000.000.
000
(Secondary)
000.000.000.
000
Specifies the IP address
of the primary or
secondary WINS server.
The factory settings are shown in Bold with an asterisk.
Main
Menu
Submenu Menu Selections Options Descriptions Page