Filter
Top Products
7
In order to provide even more illustration and layout features to the label-making possibilities
available with your P-touch 2600/2610, two applications are available on the enclosed CD-
ROM: P-touch Editor 3.2 and P-touch Quick Editor. With either application, the printer driver
must also be installed in order to print labels from the P-touch 2600/2610.
On an IBM PC-Compatible Computer
BEFORE INSTALLATION
Check that your system configuration meets the following requirements.
Computer: IBM PC or compatible
Operating system: Pre-installed with Microsoft
®
Windows
®
98, 98 SE, Me, 2000 Professional
or XP
☞ For installation on Windows
®
2000, administrator privileges are required. In addition,
printing requires power user or administrator privileges. This software cannot be oper-
ated in Users groups. In addition, this software is not compatible with the Windows
®
2000 Server operating system.
With Windows
®
XP, printing and installation is only possible from an account with
administrator privileges. These operations cannot be performed from an account with
limited privileges.
Hard disk free space: At least 20 MB (100 MB to install full option)
☞ Up to 100 MB of hard disk free space may be needed when printing long labels or large
amounts of data.
Memory: At least 64 MB
Monitor: VGA or higher graphics card
USB port
CD-ROM drive
INSTALLING THE P-TOUCH EDITOR 3.2 SOFTWARE
The P-touch Editor 3.2 software includes a variety of more complex functions for printing bar-
codes and images, enabling you to design just about any label that you can image. Install the
P-touch Editor 3.2 software onto a PC as described below.
☞ Do not connect the P-touch 2600/2610 to the computer before installing the software,
otherwise it may not be installed correctly. Be sure to connect the P-touch 2600/2610
only when you are instructed to do so.
INSTALLING THE SOFTWARE AND PRINTER DRIVER