Filter
Top Products
86
EXAMPLE
This function prints your label so that the text can be read from the adhesive side of the tape. If
mirror-printed labels are attached to glass or some other transparent material, they can be read
correctly from the opposite side.
☞ When using the Mirror printing function, the text should be printed on CLEAR TAPE.
The default mirror printing setting is OFF.
To change the mirror printing setting:
1 While holding down c, press p once, and keep c held down to display the cur-
rent mirror printing setting.
2 While still holding down c, continue pressing p until the desired mirror printing set-
ting is displayed.
3 Release c to apply the selected mirror printing setting to the entire text.
To select the RIGHT horizontal alignment setting:
1
While holding down c, press R once, and
keep c held down.
2 While still holding down c, continue pressing
R until RIGHT is displayed.
3 Release c.
When the Mirror printing
function is set to ON:
LEFT
ALIGN
RIGHT
ALIGN
TZ-Tape
AV-Label
MIRROR PRINTING FUNCTION