Filter
Top Products
1
2
3
4
5
6
7
8
9
15
z GETTING STARTED
Power Supply
AC Adapter (Optional on the PT-2030.)
Connect the AC adapter directly to the P-touch labeler.
Insert the plug on the AC adapter cord into the connector marked DC IN 9-9.5V
on the P-touch labeler.
Insert the AC adapter plug into a standard electrical outlet.
1
2
• Turn the P-touch labeler off before disconnecting the AC adapter.
• Do not pull or bend the AC adapter cord.
To safe guard and backup the labeler's memory, when the AC adapter is unplugged it is
recommended to have AA-size alkaline batteries (LR6) installed into the machine.
WARNING
• Use only the adapter, which is designed exclusively for your P-touch. Failure to observe
this may result in an accident or damage. Brother shall not assume any responsibility for
any accident or damage resulting from not using the specified AC adapter.
• Do not connect the AC adapter to a non-standard electrical outlet. Failure to observe this
may result in an accident or damage. Brother shall not assume any responsibility for any
accident or damage resulting from not using a standard electrical outlet.
CAUTION
• Disconnect the AC adapter from the P-touch and electrical outlet when you do not intend
to use the P-touch for an extended period.
• When power is disconnected for more than two minutes, all text and format settings will
be cleared. Any text files stored in the memory will also be cleared.