Filter
Top Products
EDITING A LABEL
38
Creating a Bar Code Label
zBar Code Settingsz
Entering Bar Code Data
Press the
Bar Code
key.
The Bar Code Input screen is displayed.
Type in the bar code data.
Special characters can be entered in the bar code
when using the CODE39, CODABAR, CODE128 or
GS1-128 (UCC/EAN-128) protocols. When not using
special characters, go to step 5.
Press the
Symbol
key.
A list of characters available for the current protocol is displayed.
Select a character using
the or
key, then press
the
OK
or
Enter
key to insert the character in the bar
code data.
Press the
OK
or
Enter
key
to insert the bar code in the
label.
The bar code is displayed on the text entry screen.
Attribute Value
Protocol
CODE39
, CODE128, EAN-8, EAN-13,
GS1-128 (UCC/EAN-128), UPC-A, UPC-E, I-2/5 (ITF),
CODABAR
Width
Small
Large
Under#
(characters printed
below bar code)
On
Off
C.Digit
(check digit)
Off
On
(only available for the CODE39, I-2/5
and CODABAR protocols)
1
Up to five bar codes can be entered on a label.
2
3
4
5